CTB 50V 250W Projector Lamp
bulbctb.jpg

*$50.00 Each

*Discontinued-27 Remaining In Stock

Lamps ordered will be shipped the next business day by USPS Priority Mail or UPS. Large orders may qualify for a discount and may not qualify for next day shipment. If you do not know what lamp you require or for lamps not listed, email your request or call 336-882-2854. To order, please use our secure shopping cart above or call 336-882-2852 or 800-692-3051. Click to go to our Home Page, View Cart and to find Shipping Information.

Voltage: 50V, 50 Volt, 50 Volts
Wattage: 250W, 250 Watt, 250 Watts
Base: P28s, Medium Pre-focus, Med. Pf.
Glass: T10, T-10, Clear  
Average Life: 50 Hours
Burn Position: Burn Base Down
Filament: C-13 Fila
Maximum Overall Length: MOL 5.5"/140mm LCL 3.2"/80mm
Maximum Overall Diameter: MOD 1.25"/32mm

Alternate Part Numbers: PH/250T10/56-50V, CTB-50V, Mazda, For E. K Co.

Eastman Kodak Company

Kodascope Model B

This lamp is used in Model A Kodascope Series K projectors that normally use the 200W lamp. The 250W lamp give greater illumination than the 200W lamp referred to on page 30 of the Kodascope manual. To obtain proper illumination of the picture with the 250 watt lamp, adjust the rheostat by moving the lamp rheostat knob D, Fig. 4 (page 6 of the Kodascope manual), upward until the needel of the ammeter is at the arrow at the figure 5. The Kodacope manual on pages 6, 16, 23 and 31 states that the arrow shoud be at figure 4, which is correct for the 200 watt lamp. On pages 24 and 31 of the Kodascope manual, change the instructions for adjusting the illumination for Kodacolor pictures, so that the needle on the ammeter points tot he figure 5 instead of to 4.2.

Cross reference information is designed to help you find the correct lamp for your application. We do not verify the accuracy of this information. You are responsible for ordering the correct lamp and we make every attempt to help you in that process. We recommend that you confirm the information with the equipment manufacturer before ordering.

Replacementlightbulbs.com
800 Burton Avenue, Suite 107
High Point, NC 27262
336-882-BULB (2852)

Order Line: 800-692-3051
Technical Support Line: 336-882-2854
Fax Line: 336-882-2819

Hours: 8 AM to 4 PM EST Monday through Friday

Sales: Address changes, invoice copies, tracking and delivery confirmation numbers, order status, product availability, payment options, shipping quotes, returns, damage claims
336-882-2852
sales@replacementlightbulbs.com

Technical Support: Help finding a product not listed, determining the correct lamp for your application, lamp handling and premature lamp failures
336-882-2854
support@replacementlightbulbs.com

International Orders: Large international orders that require special shipping arrangements and quotes
in@replacementlightbulbs.com

If you have compliments, complaints, suggestions, or help with areas not listed above please contact:

Ron Miller
General Manager

ron@replacementlightbulbs.com