CH13-120B 13W G24d-1 Fluorescent Lamp Ballast
*Ballast for 13W G24d-1 Lamps $12.95 Each
Use only with G24D-1 base 13W lamps. Do not use with GX23-2 13W lamps.
*57 Remaining In Stock
Lamps ordered will generally be shipped the next business day by USPS Priority
UPS, check here for Shipping Information. Large orders may qualify for a discount and may not
for next day shipment. If you do not know what lamp you require or for
lamps not listed, email
your request or call 336-882-2854. To order, please use our secure
shopping cart or call 336-882-2852 or 800-692-3051. Click to go to our Home Page and View Cart.
Lamp Type: 13W G24d-1
Class P, Type 1 Outdoor
Sound Rating: A
120V 50/60Hz .21A
Use Only Within an Electrical Enclosure
Ballast Must Be Grounded
UL Listed E240748
You can find the QT13/G24D1/65 lamp to match this ballast here.
This is not a dimmable ballast.
Do not use with a dimmer.
Do not use in 230V applications.
This ballast is specifically made for the 13W G24D-1 base style bulbs. This
ballast is not designed for any other bulb type.
If you have any questions about using or installing this ballast please
call technical support at 336-882-2854.
This ballast may not fit in all
fixtures. Each equipment manufacturer has their own ballast with a
variety of shapes, sizes and wiring methods. In some cases it may
require a little engineering to use this ballast in your fixture.
This ballast is 2.656"/67.47mm long, 1.743"/44.29mm wide and
1.061"/26.95mm tall. The length including the base plate is
Basic Wiring Information
The white wire is the neutral wire and goes to the white wire coming
from the wall.
The black wire is the hot wire and will go through your switch. This
means that the black wire from the wall will go to one side of your switch and
a wire from the other side of the switch goes to the black wire on the ballast. The switch interrupts the power supplied to
Our ballast has one red and one yellow wire coming out of the ballast.
These two wires go to the socket directly. The bulb has two filaments
and an internal capacitor to start the lamp. It does not matter which wire goes to which pin, only that one wire goes to one pin and the other wire goes ot the other pin on the lamp.
Cross reference information is designed to help you find the
correct part for your application. We do not verify the accuracy of
You are responsible for ordering the correct part and we make
every attempt to help you in that process. We recommend that you
the information with the equipment manufacturer before ordering.
800 Burton Avenue, Suite 107
High Point, NC 27262
Order Line: 800-692-3051
Technical Support Line: 336-882-2854
Fax Line: 336-882-2819
Hours: 8 AM to 4 PM EST Monday through Friday
changes, invoice copies, tracking and delivery confirmation numbers,
order status, product availability, payment options, shipping quotes,
returns, damage claims
Technical Support: Help
finding a product not listed, determining the correct lamp for your
application, lamp handling and premature lamp failures
Large international orders that require special shipping arrangements
If you have compliments, complaints, suggestions, or help with
areas not listed above please contact: