Lamps ordered will generally be shipped the next business day by USPS Priority
Mail or
UPS, check here for Shipping Information. Large orders may qualify for a discount and may not
qualify
for next day shipment. If you do not know what lamp you require or for
lamps not listed, email
your request or call 336-882-2854. To order, please use our secure
shopping cart or call 336-882-2852 or 800-692-3051. Click to go to our Home Page and $0.00.
Wattage: 2000W, 2000 Watt, Watts
Main Voltage: 400V, Control Gear or Ballast Driven
Amperage: 8.7A
Base: Cable, C10.5 L Cover
Glass: T8.5, T28mm Clear
Arc Length: 83mm
Maximum Overall Length: 6.75" or 172mm Excluding Wires, 14" Wires
UVA Output: 537W IEC
1 Hour
Average Rated Life: 800 Useful Hours
Medium Pressure Metal Halide Radiators with Iron and Cobalt Additives
Run-Up Time 4 Minutes
Allow a few minutes of cooling before re-ignition.
Emits Ozone Free Radiation Mainly Between 300nm and 400nm
Typical Use: Sun Tanning Equipment
A suitable filter must be used to provide protection against the emitted UV-B and UV-C radiation.
Forced cooling is required, especially when used in enclosed equipment.
Use only in a fixture equipped with a timer.
Use only in fixture equipped with an appropriate filter.
Always follow fixture instructions.
MSDS
Cross reference information is designed to help you find the
correct lamp for your application. We do not verify the accuracy of
this information. You are responsible for ordering the correct lamp and
we make every attempt to help you in that process. We recommend that
you confirm the information with the equipment manufacturer before
ordering.
Technical Support: Help
finding a product not listed, determining the correct lamp for your
application, lamp handling and premature lamp failures
336-882-2854 support@replacementlightbulbs.com
International Orders:
Large international orders that require special shipping arrangements
and quotes in@replacementlightbulbs.com
If you have compliments, complaints, suggestions, or help with
areas not listed above please contact: